|
PRESSURE SAND FILTER
We offer durable pressure sand filters that are used for the removal of suspended solids & turbidity. The pressure sand filter is extremely robust method of removing suspended solids from water. The filtration medium comprised of multiple layer of sand having different size & specific gravity. As per the needs of customers, we can offer sand filters in various sizes and material apart from hand operated or fully automatically, Filter is used for separating water suspended solid for better operation of filter, suspended solid should be coagulated. The advantages of pressure filter are high speed of filtration, less space, low charge and prevent heat loss after the warm or hot lime process.
pressure filters, which may be vertical or horizontal, have cylindrical steel shells and dished heads. The flow in pressure filters is downward. Usually sand or anthracite is the filter medium in a bed consisting of either one or two grades of sand or anthracite. A gravel bed supports the filter medium, prevents fine sand or anthracite from passing into the under drain system and distributes backwash water.
The water, which should be filtered, enters over the top of filter and pass from its bed then they collected at the bottom of filter. The suspended matter is strained out of the water and held in the voids between the filtering granules. The accumulation load of suspended matter in the bed causes an increasing loss of pressure during the filter run. When this loss reaches a predetermined limit, the filter is backwashed upward, discharging the suspended load out to the sewer.
We have various size of pressure sand filter plant
MODEL |
VALVE |
TOP / SIDE |
15 |
¾” ( 20 NB ) |
TOP |
30 |
¾” ( 20 NB ) |
TOP |
60 |
¾” ( 20 NB ) |
TOP |
80 |
¾” ( 20 NB ) |
TOP |
100 |
1 ½” (40 NB) |
TOP |
150 |
1 ½” ( 40NB ) |
TOP |
200 |
1 ½” ( 40NB ) |
TOP |
250 |
1 ½” ( 40NB ) |
SIDE |
330 |
1 ½” ( 40NB ) |
SIDE |
450 |
1 ½” ( 40NB ) |
SIDE |
750 / 750 |
1 ½” ( 40NB ) |
SIDE |
1000 |
1 ½” ( 40NB ) |
SIDE |
|