RESIN :
Resin is a natural or synthetic compound which begins in a highly viscous state and hardens with treatment. Typically, resin is soluble in alcohol, but not in water. There are a number of different classes of resin, depending on exact chemical composition and potential uses. There are numerous applications for resins, ranging from art to polymer production, and many consumers interact with products which contain resin on a daily basis.
3 Steps for Resin Cleaning for Softner & DM -
1. Backwashing Phase: This removes dirt from the mineral tank and is part of the regeneration process
2. Regeneration Phase: The mineral tank is recharged with sodium from the brine tank solution and displaces calcium and magnesium,
which is then washed down the drain during the Backwashing Phase.
3. Rinse Phase: The mineral tank is rinsed with fresh water and loads the brine tank so that it is ready for the next cycle.
As water passes through the mineral tank, the positively charges calcium and magnesium ions are lost to negatively charged plastic beads. The brine tank holds a solution of water and salt that will flush the mineral tank and replace the calcium and magnesium ions with sodium. Recharging cycles are controlled by the meter on the top of the tank (normally once every 7 days).
RESIN CLEANING CHEMICALS :-
CATION RESIN CLEANING COMPOUND
AQUABLEND-RCC IS AN ONLINE CATION RESIN CLEANING COMPOUND FOR PREVENTION OF ORGANIC FOULING & HEAVY METAL FOULING OF RESIN. IT IS A BLEND OF SEVERAL SURFACTANTS & IRON SOLUBULISING AGENT.
ANION RESIN CLEANING COMPOUND
AQUABLEND-RCA IS AN ONLINE ANION RESIN CLEANING COMPOUND FOR PREVENTION OF ORGANIC FOULING & BIOLOGICAL FOULING OF RESIN. IT IS A BLEND OF SEVERAL SURFACTANTS & BIOLOGICAL PREVENTIVE AGENT.
|