THERMIN DC
ONLINE THERMIC FLUID DECARBONIZING CHEMICAL
PRODUCT DETAIL
Thermin DC is a powerful formation which is a combination of strong carbon dispersant, emulsifier & corrosion inhibitor.
This formulation is used effectively for online decarbonization of entire thermic fluid system.
Continuous use of thermic fluid systems results in to deteriorating of Thermic fluid.
The main causes for deterioration are oxidation & cracking.
- Oxidation: Oxidation at higher temperatures causes formation of sticky carbon. This causes choking of the system & reduced heat transfer efficiency & also produces acidic products. These add to viscosity of the oil along with increase in corrosion rate at internal parts of thermic
fluid heating system.
- Cracking: Overheating of the thermic fluid caused by insufficient circulation. This results in to de-polymerization of long chain compound.
This localized heating above cracking temperature of oil. Cracking results in to release higher hydrocarbons which increases viscosity & reduces flash point of thermic fluid. Polymerization cause by these hydrocarbons form deposits reducing flow rate & heat transfer efficiency.
ADVANTAGE OF USING THERMIC – DC
- Online application.
- Working temperature up to 300˚C.
- Unique penetrate through deposits & scales.
- Easy to use.
- Economical.
DOSAGE & APPLICATION
Thermin – DC is to be dosed in proportion of 2 – 5% in the thermic fluid. Thermin – DC propagates along with the thermic fluid cleaning the hard fluid improving it’s viscosity. The loose carbon particles get homogeneous. The corrosion inhibitor present in Thermin – DC keeps system safe from any possible form of corrosion during this operation.
The optimum dose will be decided only after observing actual system status & working conditions. Representative of NUMATIK ENGINEERS PVT LTD will provide technical assistance to set up optimum dosages suitable to on site operating conditions and available dosing system.
The difficult carbon deposits can be removed only by a strong penetrant & dispersant. Thermin – DC contains a penetrant which dissolve hard carbon deposits. This action is enhanced by built in strong emulsifier catalyst. A corrosion inhibitors also present in the product will ensure the completion of the job without corrosion & pitting.
STORAGE & HANDLING
Thermin – DC should be stored in an air tight container away from direct heat. Always store at cool & dry place.
Thermin – DC is an oil based solution. Normal precaution should be taken while handling . Wash thoroughly with water in case of contact. Do not swallow.
|